Pro Breeze AeraDry® air purifier beside a bed, one of the models with a replaceable HEPA filter

When to replace an air purifier HEPA filter and which one fits

Find out when your air purifier needs a new HEPA filter, how to match the replacement to the model label and what to check if the filter light stays on.

The quick answer

  • When to change it: follow your model’s replacement schedule or filter reminder. Intervals and indicator lights vary by model.
  • Which filter fits: find the model code on the appliance label and compare it with the replacement filter’s compatibility information. See the matching table.
  • How to change it: unplug the appliance, fit the new filter with any packaging removed and refit the cover. See the steps.
  • If the light keeps flashing: use the reset instructions for your exact model after installing the replacement. Find the right reset.
Pro Breeze AeraDry® air purifier beside a bed, one of the models with a replaceable HEPA filter

When you need to replace an air purifier HEPA filter, start with two checks. Read the maintenance schedule for your model and find the model code on the appliance label. Some purifiers count operating hours and signal when a new filter is due. Others use a calendar interval. A filter that looks similar may be made for a different purifier, so use the label to check before ordering.

1When should you replace an air purifier HEPA filter?

A HEPA filter traps fine airborne particles as air passes through it. Over time, the material collects dust and other particles. The replacement schedule gives you a starting point for maintenance. On a model that counts run time, the reminder marks a number of hours used. It is worth noting when you fitted the filter in case you need to check its age later.

Pay attention to sudden changes as well as the reminder. If airflow at your usual speed seems weaker, switch off and unplug the unit before checking the manual’s cleaning instructions for the inlets and the filter. Dust on the outside grille or around an intake can obstruct airflow too. If a filter is torn, misshapen or damp, contact Pro Breeze if you are unsure whether it can be used and check the model instructions for replacement.

On a combined cartridge, the layers do different jobs. A pre-filter catches coarser material, a HEPA layer captures fine particles, and activated carbon helps with some odours when fitted. A recurring cooking smell alone is a poor guide to the condition of the HEPA layer. For more on choosing filtration for each job, see the air purifier buying guide.

2Which replacement HEPA filter fits your Pro Breeze model?

Find the code on the rating label on your purifier. Take a photo so you can compare it with the packaging or product listing. Similar names such as Mini, 3-in-1 and 4-in-1 can refer to different appliances. Model compatibility matters more than the shape, size or filter grade printed on the front of the box.

Purifier on the label Matching EU replacement When to check for replacement
3-in-1 Mini Air Purifier (PB-P02) 3-in-1 replacement HEPA filter (PB-P02F) The PB-P02 manual recommends replacing the filter after six months of use.
4-in-1 Air Purifier (PB-P03) 4-in-1 replacement HEPA filter (PB-P03F) The manual says every three to six months or 680 hours of operation. The filter light flashes at 680 hours.
Ultra-Powerful Air Purifier with UV-Cleansing Light (PB-P07) Replacement filter for the Ultra Powerful Air Purifier Pro Breeze guidance gives six to twelve months or 2,000 operating hours. The filter reminder flashes and beeps at 2,000 hours.
AeraDry® 25L 2-in-1 Dehumidifier and Air Purifier AeraDry® replacement HEPA H13 filter Use the filter maintenance instructions supplied with your exact AeraDry® model.

Keep your model code with your filter order details. When buying the next replacement, compare the manufacturer’s compatibility information again, especially if you now have more than one purifier. If the cartridge you receive looks different, check the part number before opening its protective bag. A changed box or a familiar HEPA grade gives you less information about fit than an explicit match to the code on your appliance.

For a filter budget, the EU catalogue examples range from €15.99 for the 3-in-1 mini replacement to €46.99 for the PB-P07 replacement. Start with the correct model match. If your purifier is outside this table, check its manual for the replacement code or ask Pro Breeze using a photo of the label.

Replacement HEPA Filter for 3-in-1 Air Purifier

€15,99

View product

Replacement HEPA H13 Filter for AeraDry 2-in-1 Air Purifier and Dehumidifier

€24,99

View product

3Can you clean an air purifier HEPA filter?

Check which filter or layer the manual allows you to clean. On some units the pre-filter is separate. On others the layers come as a single cartridge. The PB-P02 and PB-P03 manuals describe using a vacuum cleaner to remove surface dust from the filter as routine care. Follow the instructions for your model and keep to its replacement schedule.

Wash only parts the manual explicitly identifies as washable. If the instructions give a dry method, stick with it. Keep water and household spray away from the appliance and the filter materials unless the manual specifies otherwise. Check the grille and air inlet at the same time because loose dust there can interfere with the airflow.

Changing the HEPA filter keeps the purifier ready for its part in looking after room air. Ventilation and regular cleaning address other parts of the job. See what an air purifier can do at home for help working out where filtration is useful.

4How to fit a replacement HEPA filter

  1. Switch off and unplug the purifier. Use the manual to find the access point. For the PB-P02 this is the twist-off base. The PB-P07 has a separate filter cover.
  2. Remove the used filter. Check how it sits in the unit before pulling it out. Use the pull tab if the manual shows one. Handle the old cartridge gently so loose dust stays on the filter.
  3. Unpack and fit the new cartridge. Remove any protective bag. Check any directional markings or orientation diagram and seat the filter securely. If it does not seat properly, check the code and orientation before trying again.
  4. Put the cover or base back. Make sure it locks or closes as shown in the manual before reconnecting the purifier. Note the date of the replacement for your next maintenance check.

The AeraDry® has two functions in one appliance, with a separate HEPA filter for the purifier. Use its model instructions to identify the correct filter compartment. See the AeraDry® guide for how the two systems work.

5How do you reset the filter replacement light?

Use the reset after fitting a fresh filter. For the PB-P03, the manual says to hold the filter change indicator for three seconds with a toothpick or similar tool as shown in the instructions. Three beeps confirm the reset. For the PB-P07, hold the UV and Timer buttons together for five seconds after changing the filter and refitting the cover.

If the indicator stays on, check the model number and follow the relevant reset steps again. If the appliance does not start, check that the cover has closed and the filter is seated correctly with the packaging removed. Unplug it before reopening the filter compartment. If the problem persists, tell Pro Breeze the exact model code and which light or message you see.

6Frequently asked questions

Can one HEPA filter fit both the 3-in-1 and 4-in-1 purifiers?

The PB-P02 and PB-P03 use different replacement parts, PB-P02F and PB-P03F respectively. Check the model code before buying either replacement.

Should I change the filter if it still looks clean?

Follow the timing in your manual or the model’s filter reminder. The surface is only one part of the filter, and its appearance can be hard to judge.

Can I reuse the filter after vacuuming it?

If the manual allows surface vacuuming and the filter is still within its service interval, put it back as directed. Fit a replacement when it reaches the model’s replacement point.

Use the air treatment spare parts collection to compare model-matched replacements. If you are choosing a new appliance, explore the Pro Breeze air purifiers and check the running and replacement costs together.

Pro Breeze Product Team

Model references: Pro Breeze PB-P02 manual, PB-P03 EU manual and Pro Breeze PB-P07 manual. Compatible filter products and prices are from the EU catalogue.

Last reviewed 19 November 2026.

Continue reading

Pro Breeze AeraDry® air purifier beside a bed, one of the models with a replaceable HEPA filter
Air Quality

When to replace an air purifier HEPA filter and which one fits

Find out when your air purifier needs a new HEPA filter, how to match the replacement to the model label and what to check if the filter light stays on.
Woman switching on a Pro Breeze OmniDry dehumidifier
Dehumidifiers

Pro Breeze dehumidifier instructions: manuals and setup by model

Find the right Pro Breeze dehumidifier manual by model code. Get help with first use, controls, drainage, error codes and cleaning.
Pro Breeze OmniCool™ portable air conditioner venting through a living room window
Cooling & Fans

How much does a portable air conditioner cost to run?

Compare portable air conditioner running costs for 9,000, 12,000 and 14,000 BTU models. Use the formula and your electricity tariff to estimate the cost per hour or per day.

Free shipping

Enjoy fast and free delivery on all orders