The quick answer
- For the weekly clean: switch off and unplug the ice maker, drain the tank, wash the tray and scoop, and wipe out the cabinet. See what to clean by hand.
- For limescale: the Pro Breeze PB-IM01 manual specifies equal parts water and vinegar in Self-Cleaning mode, followed by a second cycle with fresh water. See the descaling and rinse steps.
- If it stops making ice: check whether the panel shows Add Water or Ice Full before running another cleaning cycle. Find the check for each light.

Here’s how to clean an ice maker when the tank needs emptying, the scoop needs washing or limescale has built up. The steps apply to the Pro Breeze PB-IM01 countertop model. Check the model on your appliance first. Each part has its own cleaning method, and the machine’s Self-Cleaning mode includes a separate rinse. If you have a different model, use its own manual for the cleaning solution, buttons and drain.
1Before you clean and how to drain the tank
Turn the ice maker off, disconnect it from the wall socket and let it reach room temperature before cleaning it by hand. Remove the ice from the tray. Have a container ready for the water from the tank, along with a soft cloth for wiping and a clean, dry one for drying.
- Keep the ice maker upright as you position it so the drain under the front can empty into your container.
- Set the container underneath the drain and remove the plug. Let the water finish draining.
- Refit the drain plug before you fill the tank again. If you’re putting the machine away, dry inside with a clean cloth or leave the lid open to air-dry.
Use the same drain after the vinegar cycle and after the fresh-water rinse. The drain plug is separate from the lid and tray. Lifting out the tray gives access to the tank, while the plug underneath lets you empty it with the appliance still upright.
2How to clean an ice maker by hand
The manual recommends a clean once a week. Do a thorough clean before the first use too. For hand cleaning, keep the appliance disconnected from the mains and work through the removable parts, cabinet and outside separately.
- Tray and scoop: lift the tray by its handles. Wash both accessories in warm water with mild soap, rinse them and dry them. You can also use the top rack of a dishwasher for these two parts. Choose a cycle without a deep-clean or sanitising setting.
- Inside the cabinet: with the tray out, wipe the inside with a clean damp cloth and dry with a second cloth. Leave the metal evaporator, part 12 in the manual, alone during hand cleaning. Refit the tray when the cabinet is dry.
- Outside: wipe the case using a soft cloth dampened with mild soapy water. Dry it with a clean cloth. Keep liquid away from openings and avoid abrasive products or scouring pads.
3How to descale the ice maker and rinse it
For the PB-IM01, use the water-and-vinegar mixture specified in the instruction manual. You run the programme twice, first with the cleaning solution, then with fresh water. Fill and drain with the machine unplugged. During each powered cycle, keep the machine connected and wait for the panel to return to standby.
First cycle with water and vinegar
- With the machine unplugged and the ice tray removed, put equal parts water and vinegar in the reservoir up to the MAX line.
- Connect the appliance and press Power to switch it on. Press Select to choose Self-Cleaning. The programme starts after a five-second delay.
- Wait for standby, unplug the machine and drain the solution using the plug beneath the front.
Second cycle with fresh water
- Refit the drain plug and fill to MAX with fresh water while the appliance is still unplugged.
- Plug in, press Power and select Self-Cleaning again. Wait for it to complete and return to standby.
- Unplug the machine, drain the rinse water and refit the plug. Return the clean tray before making ice.
4How to prepare it for ice again
If this is the first use or the machine has come out of storage, the manual says to let it stand upright for two hours before switching on so the refrigerant can settle. With the machine unplugged and the drain plug fitted, fill the reservoir to MAX with drinking water. Refit the tray, close the lid, switch the machine on and use Select to choose small or large cubes.
For storage, drain, clean and dry the unit before packing it away. Once dry, keep it somewhere clean, dry and out of direct sunlight. Clean it again before you next make ice.
5What to check if the ice maker stops making ice
Start with the lights. An empty tank and a full tray both stop ice production as part of normal operation. Each has a different restart sequence.
| What you see | What to check |
|---|---|
| Add Water light | Unplug, refill to MAX with drinking water, reconnect and follow the manual’s Power restart. The troubleshooting table specifies two presses of the Power button. Use drinking water in place of distilled or ultrapure water, which can interfere with level detection. |
| Ice Full light and a full tray | Remove the cubes with the scoop once production has paused. The machine resumes automatically when the tray is empty. |
| Ice Full light and an empty tray | Check whether the infrared sensor is obstructed. Switch off and unplug before cleaning its surface as described in the manual. Move the machine away from direct sun if sunlight is interfering. |
| The control panel is dark | Check the plug and press Power. Contact customer care if the panel remains dark. |
| All lights come on, or ice still fails to form | Contact customer care. Electrical, mechanical and refrigerant repairs are for qualified service providers. |
If ice sticks after a power interruption, use the manual’s specific restart instructions. Keep the machine unplugged while carrying out any handling steps. If the machine is in direct sunlight, move it away from the window when switched off and unplugged. If the whole room is hot, see ways to keep your home cooler.
6Pro Breeze countertop ice makers
Compare the white and black versions below. The PB-IM01 is rated at 120 W. At the EU reference price of €0.28 per kWh, one hour at that rating costs about 3.4 cents. This is a calculation from the rated input. For capacity, cube size and room on the worktop, see how to choose a countertop ice maker.
7FAQs
How often should I clean a countertop ice maker?
Pro Breeze recommends a weekly clean for the PB-IM01. Clean it before first use too. When putting it away, empty the tank and leave the appliance clean and dry.
Why won’t the self-cleaning programme start?
Plug the appliance in and press Power to take it out of standby. Choose Self-Cleaning with Select and allow five seconds for the programme to begin.
Why are the first cubes small or cloudy?
The manual says the first five cycles can produce smaller, irregular cubes. Fast freezing can trap air and turn cubes cloudy, with no effect on their taste or quality.
Explore the Pro Breeze countertop ice maker range to compare the two colours.








